Scott Olson's Album: my new layout

Starting with the Virginian benchwork and hoping to put my own spin on it.

Photo 2 of 54 in my new layout

some elevation
3 comments
  • Brian "Chessie lives!!!" W.
    Brian "Chessie lives!!!" W. Looking good Scott! How did you measure the 4" rise? From top of the ground level to the top of the 2nd level?
    February 1, 2012
  • Scott Olson
    Scott Olson I haven't done the 4" yet, but where the square is is the 2" elevation and I did it from the base level of 0 which is the middle level. Hoping it works, I may need to do a little extra cutting to allow the plywood to flex right.
    February 1, 2012
  • Brian "Chessie lives!!!" W.
    Brian "Chessie lives!!!" W. yea that is how I did mine from the top of 0" to the top of 4" that's how I did mine. I figure if i was wrong it would only be 15/16 inch off. I didn't go with 1/2 inch plywood I went with 15/16 plywood. I figured it was close enough and it w...  more
    February 1, 2012