Articles

 

Archives

Showing articles posted using tag #Pullman Standard (x)

All Categories

  • September 30, 2011 - posted by Christopher Brimley - 4,971 views - 0 comments - 1 like
    by Ken Edmier Photos by Ken Edmier and Tim Frederick GA-191 brake-end detail. Note horizontal brake beam and low-mounted brake cylinder. GA-191 End Detail & Assembly For the GA-191 class, the brake air tank is mounted on the left s...
  • November 1, 2012 - posted by David Lotz - 3,119 views - 0 comments - 0 likes
    An Advanced Modeling Project by John Porter The Santa Fe Bx-3 Class Box Car featured in this article together with the Ann Arbor box car from the October issue of Prototype Modeler.    This article is meant for the expe...
  • October 26, 2012 - posted by David Lotz - 10,317 views - 0 comments - 0 likes
    MODELING WITH PAINT & DECALS by James Eager [TrainLife Editor Note: This article was written 18 years ago in 1994, just shortly after the release of Walthers PS 4427 models in HO scale, however, new and much improved models are ava...
  • September 11, 2012 - posted by David Lotz - 1,285 views - 0 comments - 0 likes
    by W. J. Metzer    The prototype cars of this conversion are four-compartment, 5250 cu. ft., 125-Ton versions of the Pullman-Standard PS-2CD covered hoppers. They have been purchased by many railroads and grain loading co...
  • November 17, 2011 - posted by Christopher Brimley - 2,222 views - 0 comments - 2 likes
    by Ken Edmier Photos by the author For some reason, I like the Frisco. Since I was only 14 years old when the Frisco became part of the Burlington Northern, I never got to experience the Frisco firsthand. I have always wanted to model ...
  • September 28, 2011 - posted by Christopher Brimley - 3,267 views - 0 comments - 1 like
    by Ken Edmier Photos by Ken Edmier and Tim Frederick After purchasing 8,400 Pullman Standard 4427 covered hoppers from 1963 to 1971, Santa Fe decided in 1972 to start ordering the newly designed PS-4750 covered hopper. Santa Fe purchas...