Magazines » 1001 Model Railroading Ideas - Fall 1971 » Page 40 Text View Magazine View

Page
of 100

Fall 1971 - Page 40


4. The long straight edges of the parts can be cut with scissors to remove the part from the paper sheet. Save the sharp angle cuts and vee-shaped notch cuts for later after the part is trimmed from the sheet. 5 . Use a sharp hobby knife or single edge razor blade to trim in to the tigh t corners. The lines on the sides and faces of the paper parts are marked to indicate which ones are "fold" lines and which ones should be cut. The paper stock is about the thickness of a file folder. 6. & 7. Dull the point o f a h obby knife blade so it can be used to scribe

6 40

Added June 2, 2011 - Share
0 comments