From the same Member

Help Needed. Part 2

Posted by Raymond Brosious
Ok guys, here is an update of my first video. I went out an bought a brand new in the box Bachmann DCC and sound equipped. locomotive. As you can see it works fine so now I'm sure it's a problem with the locomotive. Take a look and tell me what you think. Thanks for watching.
Posted February 13, 2012
click to rate

Embed  |  132 views
2 comments
  • Barry Samways
    Barry Samways I think it could be one of two things now, either the decoder has taken a dump on you or maybe just maybe the brass flywheel is rubbing on something or is on to tight to the engine, I had that problem once which stopped the loco from moving. It might be w...  more
    February 13, 2012
  • Toni Ryan
    Toni Ryan From your first video - I know that the sounds were going, but could you control the lights, horn and bell? If so, then the decoder is working, but the motor control circuit may be fried, or the motor may be bad or jammed. I see there are plugs on the D...  more
    February 24, 2012